Digital 4 Phase Stepper Driver For Stepper Motors

LICHUAN® is Digital 4 Phase Stepper Driver For Stepper Motors manufacturers and suppliers in China who can wholesale Digital 4 Phase Stepper Driver For Stepper Motors. We can provide professional service and better price for you. If you interested in Digital 4 Phase Stepper Driver For Stepper Motors products, please contact with us. We follow the quality of rest assured that the price of conscience, dedicated service.

MC542E is a new generation of digital 2-phase hybrid stepping motor drive based on a DSP with advanced control algorithm. Arbitrary microstepping within 128 and any current value within the rated current can be set according to users’ needs.Due to it increases the function of automatic identification of motor parameters inside, corresponding operation parameters can be set for different motors, which make motors run smoothly with smaller noise. It is suitable for driving 2-phase Nema17,Nema23 hybrid stepper motors.

● Supply voltage:20~50 VDC;
● Output current: 1.0 A~4.2 A;
● Pulse input frequency: 200KHz;
● 15 selectable resolutions up to 25,600 steps/rev;
● TTL compatible and optically isolated input;
● Pure-sinusoidal current control technology;
● Self-adjustment technology;
● Support PUL/DIR and CW/CCW modes;
● Short-voltage, over-voltage, over-current protections; · Automatic idle-current reduction

● Voltage input range: DC20V~40V
● Maximum peak current: 4.2A
● Subdivision range:200～25600ppr
● Pulse form: pulse + direction
● Impulse response frequency:0～200KHz
● Motor parameter auto-tuning function
● With protection functions such as overvoltage, overcurrent, tracking error out of tolerance,etc.

Suitable for a wide range of stepping motors, from NEMA size 17 to 34. It can be used in various kinds of machines, such as X-Y tables, engraving machines, labeling machines, laser cutters, pick-place devices, and so on. Particularly adapt to the applications desired with low noise, low heating, high speed and high precision.

● Voltage input range: DC20V～50V Maximum peak current: 4.2A
● Subdivision range:200～25600ppr
● Pulse form: pulse + direction
● Impulse response frequency:0～200KHz
● Motor parameter auto-tuning function
● With protection functions such as overvoltage, overcurrent, tracking error out of tolerance, etc.

● Storage temperature:-20 ℃~65 ℃
● Operating temperature:0 ℃~50 ℃
● Operating humidity:40～90%RH(non-condensing)
● Vibration frequency:less than 0.5G(4.9m/s2)10Hz~ 55Hz(discontinuous operation)
● Avoid dust, oil stains, corrosive gases, places with too much humidity and too strong vibration, and prohibit flammable gas and conductive dust